Chainsaws are powerful and full of horsepower because they use gasoline and can cut trees with very hitch diameters. This can be used as a domestic chainsaw, 2.2kw to meet all the family felling trees, can also be used as a professional chainsaw, reliable quality, durable and cost-effective.

The composition of the chainsaw is divided into three parts, the first part is the cutting system, this is mainly the external working part of the machine, mainly composed of chainsaw chain, guide plate. The second part is the transfer system, mainly by the starter, pull rope and other parts. The third part is the gasoline engine system, this is the power part of the machine, only the normal work of the gasoline engine, in order to guarantee the normal work of the chainsaw. This is mainly composed of fuel tank, oil tank, refueling bing.

Chainsaw operation notes:

1, gasoline must be used more than 90, if the use of oil to use two-stroke oil, for the use of fuel must strictly abide by the use of special oil, prohibited the use of four-stroke oil.

2, with the oil should not be in accordance with their own wishes to refuel, in strict accordance with the machine comes with the oil pot for refueling.

3, before using the machine, need to run at low speed for a few minutes, check the lubrication saw chain oil into a line of oil and then work normally.

4, every time you work a tank of oil to rest for ten minutes for the adjustment time, to be cooled down by the machine's heat sink.

5, the use of spark plugs in the continued use of 25 hours after taking down, the use of wire brushes to deal with the dust on the electrode clean, the same air filter is also 20 hours to dust treatment. The muffler is treated after 50 hours for carbon deposits on the exhaust port and muffler. The fuel filter, also known as the suction head, should also be treated after 20 hours of use to remove impurities.